EasyManuals Logo

Lexmark C950 Service Manual

Lexmark C950
1014 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #384 background imageLoading...
Page #384 background image
3-88 Service Manual
5058-030
Go Back
Previous
Next
Offsetting
Offsetting is an operation to shift the position of media to be ejected to the stacker media bin so that boundaries
between media units (sets of media, job units, etc.) can be easily recognized.
Offsetting is executed for staple positions:
• During front stapling (corner)—Shifts stapled sheets using the front tamper by 20 mm to the rear side before
ejecting them to the stacker media bin
• During rear stapling (corner/straight)
– For media with a width of 216 mm or more [rear staple (corner)]—Shifts stapled sheets using the rear
tamper by 20 mm to the front side before ejecting them to the stacker media bin
– For media with a width of less than 216 mm [rear staple (straight)]—Shifts stapled sheets using the front
tamper by 9 mm to the rear side before ejecting them to the stacker media bin.
During dual stapling:
• Shifts stapled sheets using the front tamper by 9 mm to the rear side before ejecting them to the stacker
media bin.
• Offsetting is not executed (0 mm) for small media.
Functions of compiler unit assembly sensors/motors
• Sensor (compiler media in)
– A photo-interrupter sensor that detects whether media is present or not on the compiler unit assembly.
– When media is detected, the actuator leaves the sensing area, which turns the sensor to high (+5 V dc)
(light receiving).
• Sensor (front tamper HP)
– A photo-interrupter sensor that detects the front tamper home position.
– When the front tamper comes to the home position, it enters the sensor’s sensing area, which turns the
sensor to high (+5 V dc) (light blocking).
• Sensor (rear tamper HP)
– A photo-interrupter sensor that detects the rear tamper home position.
– When the rear tamper comes to the home position, it enters the sensor’s sensing area, which turns the
sensor to high (+5 V dc) (light blocking).

Table of Contents

Other manuals for Lexmark C950

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark C950 and is the answer not in the manual?

Lexmark C950 Specifications

General IconGeneral
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Processor Speed1.2 GHz
ConnectivityEthernet, USB
Print TechnologyLaser
Print Speed50 ppm
Monthly Duty Cycle300000 pages
Recommended Monthly Page Volume5, 000 - 33, 000 pages
Memory1024 MB
Hard DriveOptional
Output Capacity500 sheets
InterfaceUSB 2.0
Media TypePlain paper, Card stock, Labels, Envelopes, Transparencies
Total Media Capacity5140 sheets
Media SizesLetter, Legal, A4, A5, Executive, Folio, Statement
Operating Systems SupportedWindows, Mac, Linux

Related product manuals