Lexmark C950 - HCF Media Tray Front Cover Removal

Repair information 4-367
5058-030
Go Back
Previous
Next
3. Remove the HCF media tray (A) from the frame assembly.
Note: A little force is required to remove the HCF media tray (A) from the unit.
Note: Before re-installing the HCF media tray (A), ensure the two bearing slides (B) are properly installed into
the frame assembly.
Note: Extra force is required to re-install the HCF media tray (A) to the unit.
HCF media tray front cover removal
1. Pull out the HCF media tray.
2. Remove the five screws securing the HCF media tray front cover (A) to the HCF media tray.
B
A
Hole
A
B
Hole