Diagnostic information 2-185
5058-030
482.01 Sensor (diverter gate) static jam B (to top bin)
2
Check the sensor (diverter gate)
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (diverter
gate).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to Step 4. Go to Step 3.
3
Check the sensor (diverter gate)
for proper connection.
Is the above component
properly connected?
Replace the sensor (diverter
gate)
Go to “Sensor (diverter gate)
removal” on page 4-319.
Replace connections.
4
Check the finisher PCBA for
proper connection.
Is the above component
properly connected?
Go to Step 5. Replace connections.
5
POR the machine.
Does the error continue?
Replace the finisher PCBA.
Go to “Finisher PCBA removal”
on page 4-281.
Problem resolved
Step Action and questions Yes No
1 Check the media path.
Is the media path free of any
media fragments?
Go to step 2. Remove any media or media
fragments.
2
Check the Sensor (diverter gate)
for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (diverter
gate).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to Step 4. Go to Step 3.
3
Check the sensor (diverter gate)
for proper connection.
Is the above component
properly connected?
Replace the sensor (diverter
gate)
Go to “Sensor (diverter gate)
removal” on page 4-319.
Replace the connections.
Step Action and questions Yes No
To Next Page
Loading...
