Lexmark C950 - Sensor (Decurler Cam HP) Removal

Repair information 4-245
5058-030
Go Back
Previous
Next
4. Remove the bracket from the machine.
5. Release the hooks (B) securing the sensor (bridge top door interlock) to the bracket.
6. Remove the sensor (bridge top door interlock).
Sensor (decurler cam HP) removal
1. Remove the bridge unit assembly. See “Bridge unit assembly removal” on page 4-232.
2. Remove the bridge decurler rear cover. See “Sensor (decurler cover interlock) removal” on
page 4-247.
3. Release the hook (A) securing the sensor flag to the machine.