Lexmark C950 - Sensor (HCF Docking Interlock) Removal

4-382 Service Manual
5058-030
Go Back
Previous
Next
6. Remove the three screws securing the HCF tray lift gear bracket (D) from the media tray.
7. Remove the HCF tray lift gear bracket (D).
Note: Ensure that all gears rotate smoothly without binding. If necessary, loosen the three screws and adjust
the HCF tray lift gear bracket (D).
Sensor (HCF docking interlock) removal
1. Remove the HCF media tray.
2. Disconnect the connector from the sensor (HCF unit docking interlock) (A).
A
B
C
D