Lexmark C950 - Page 198

2-150 Service Manual
5058-030
Go Back
Previous
Next
3
Check the sensor (stacker bin
level F) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (Stacker bin
level 2).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to step 5. Go to step 4.
4
Check the sensor (stacker bin
level F) for proper connection.
Is the above component
properly connected?
Replace the sensor (stacker bin
level F). Go to “Sensor (stacker
bin level F) removal” on
page 4-331.
Replace the connection.
5
Check the media stacker bin
actuator for proper operation.
Is the media stacker bin
actuator installed properly?
Does it enter the sensing area
of the sensor (stacker bin
upper limit)?
Go to step 6. Repair the media stacker bin
actuator.
6
Check the sensor (stacker bin
upper limit) for proper operation.
1. Enter the Diagnostics Menu.
2. Touch SENSOR TESTS.
3. Touch FINISHER SENSOR
TESTS.
4. Touch Sensor (stacker bin
upper limit).
Does the display on the
operator panel change every
time the sensing area of the
above sensor is interrupted or
blocked?
Go to step 8. Go to step 7.
7
Check the sensor (stacker bin
upper limit) for proper connection.
Is the above component
properly connected?
Replace the sensor (stacker bin
upper limit). Go to
“Sensor
(stacker bin upper limit) or
sensor (stacker bin no media)
removal” on page 4-332.
Replace the connection.
Step Action and questions Yes No