3-70 Service Manual
5058-030
To access a detailed Color Samples set from the Embedded Web Server:
1. Type the printer IP address or host name in the address field of your Web browser.
Note: If you do not know the IP address or host name of the printer, then you can:
• View the information on the printer control panel home screen, or in the TCP/IP section under
the Networks/Ports menu.
• Print a network setup page or menu settings page and locate the information in the TCP/IP
section.
2. Click Configuration > Color Samples > Detailed Options.
3. Select a color conversion table.
4. Enter the RGB or CMYK color number.
5. Enter an increment value from 1–255.
Note: The closer the value is to 1, the narrower the color sample range will appear.
6. Click Print.
To Next Page
Loading...
