Diagnostic aids 3-95
5058-030
• Booklet knife solenoid
– This solenoid transfers the booklet folding/exit drive motor assembly to the knife through the gear.
• Sensor (booklet front tamper HP)
– This photo sensor detects the home position of the booklet front tamper.
• Sensor (booklet rear tamper HP)
– This photo sensor detects the home position of the booklet Rear tamper.
• Sensor (booklet compile media in)
– This photo sensor detects paper present in the booklet compiler tray.
– Booklet front tamper motor
– This stepping motor drives the booklet front tamper.
• Booklet rear tamper motor
– This stepping motor drives the booklet rear tamper.
• Sensor (booklet knife HP)
– This photo sensor detects the home position (stored condition) of knife.
• Sensor (knife folding)
– This photo sensor detects the fold position (protruded condition) of knife.
• Booklet staple assembly
– This booklet stapler consist of two stapler units (including stapler low switch) and booklet stapler head
motor.
• Booklet paddle motor
– This DC motor drives the paddle at the booklet section.
• Sensor (booklet end guide HP)
– This photo sensor detects the home position of the booklet end guide.
• Booklet end guide drive motor
– This stepping motor moves the booklet end guide up and down.
Sensor (booklet
media entrance)
Booklet media entrance
drive motor
Booklet folding/exit
motor assembly
Booklet knife solenoid
Sensor (booklet media
exit roll assembly)
Booklet media
exit roll assembly
Booklet folding
roll assembly
Booklet media
entrance roll
assembly
To Next Page
Loading...
