1-10 Service Manual
5058-030
Bin 1
• The paper capacity is 3,000 sheets when the standard finisher is installed.
• The paper capacity is 1,500 sheets when the booklet finisher is installed.
Bin 2 (booklet-maker)
Bin 2 is available only when the booklet finisher is installed. The paper capacity of Bin 2 (booklet-maker) is 300
sheets or 20 sets of 15-sheet booklets.
Bin 1 finishing features
Size
Punch*
Offset
Single/Double staple
Double dual staple
A3 ✔✔✔✔
A4 ✔✔✔✔
A5 ✘✘✘✘
Executive ✔✔✔ ✘
Folio ✘✔✔✘
JIS B4 ✔✔✔ ✘
JIS B5 ✔✔✔ ✘
Legal ✘✔✔✘
Letter ✔✔✔✔
Statement ✘✘✘✔
Tabloid ✔✔✔ ✘
Universal ✔✔✔✔
Envelopes (any size) ✘✘✘✘
*For the Universal paper size, the finishing edge must be at least 9 in. (229
mm) for a 3-hole punch and 10 in. (254 mm) for a 4-hole punch.
Punch—Selects from two-, three-, or four-hole punch
Single staple—Uses only one staple
Double staple—Uses two staples
Double dual staple—Uses two sets of two staples. This setting is supported
only for widths between 8 in. (203 mm) and 12 in. (297 mm) with lengths
between 7 in. (182 mm) and 17 in. (432 mm).
Bin 2 finishing features
Size
Bi fold
Booklet fold
Saddle staple
A3 ✔✔✔
A4 (only SEF) ✔✔✔
A5 ✘✘✘
✔—Supported
✘—Not supported
✔—Supported
✘—Not supported
To Next Page
Loading...
