Lexmark C950 - Page 58

2-10 Service Manual
5058-030
Go Back
Previous
Next
61 Remove defective
disk
Try one or more of the following:
• Touch Continue to clear the message and continue printing.
• Install a different printer hard disk before performing any operations that require
a printer hard disk.
62 Disk full Try one or more of the following:
• Touch Continue to clear the message and continue processing.
• Delete fonts, macros, and other data stored on the printer hard disk.
• Install a printer hard disk with larger capacity.
63 Unformatted disk Try one or more of the following:
• Touch Continue to clear the message and continue printing.
• Format the printer hard disk.
If the error message remains, the hard disk may be defective and require
replacing.
80.xx Fuser life warning • Order a replacement fuser immediately. When print quality is reduced, install
the new fuser, following the instruction sheet that came with the replacement
part.
• Touch Continue to clear the message and continue printing.
80 Replace fuser 1. Replace the fuser using the instruction sheet that came with the replacement
part.
2. Touch Continue to clear the message and continue printing.
80 Replace paper pick
rollers in [paper source],
use parts and
instructions in tray 1
compartment
Try one or more of the following:
• Touch Continue and replace later to ignore the message and continue
printing.
Note: Worn or defective paper pick rollers may cause paper jams.
• Replace the worn or defective paper pick rollers, and then touch Rollers
replaced to clear the message and continue printing.
80 Scheduled
maintenance [x]
Contact customer support, and report the message. The printer is scheduled for
maintenance.
82.xx Replace waste
toner bottle
1. Replace the waste toner bottle.
For instructions on replacing the waste toner bottle, from the printer control
panel touch More Information.
2. Touch Continue to clear the message and continue printing.
82.xx Waste toner bottle
missing
Reinsert the waste toner bottle into the printer.
82.xx Waste toner bottle
nearly full
Order a replacement waste toner bottle immediately.
1. Replace the waste toner bottle.
For instructions on installing the waste toner bottle, from the printer control
panel touch More Information.
2. Touch Continue to clear the message and continue printing.
84 unsupported [color]
photoconductor
Remove the specified photoconductor, and then install a supported one.
84.xx [color]
photoconductor missing
Install the specified color photoconductor, following the instruction sheet that came
with the replacement part.
84.xx [color]
photoconductor nearly
low
1. Order a replacement photoconductor.
2. When print quality is reduced, install the new photoconductor, following the
instruction sheet that came with the replacement part.
3. Touch Continue to clear the message and continue printing.
84.xx [color]
photoconductor low
1. Order a replacement photoconductor immediately.
2. When print quality is reduced, install the new photoconductor, following the
instruction sheet that came with the replacement part.
3. Touch Continue to clear the message and continue printing.
User status and attendance messages
User primary message Explanation