TDS5000B Online Programmer Guide
-- 9 9 --
AUTOSet
Description
This command (no query format) sets the vertical, horizontal, and trig-
ger controls of the instrument to automatically acquire and display the
selected waveform. (To autoset a video waveform, the video trigger
must be set to video standard, not custom.) This is equivalent to press-
ing the front--panel AUTOSET button. For a detailed description of
autoset functionality, see Autoset in the index of the online help for
your instrument.
Group
Miscellaneous
Related Command
DISplay:GRATicule
Syntax
AUTOSet {EXECute|UNDo|VIDeo|VLines|VFields}
Arguments
H EXECute
This argument autosets the displayed waveform; this is equivalent to
pressing the front--panel AUTOSET button. If the display is set to a
PAL, MV, or IRE graticule, this argument forces the graticule display
to full mode (frame, grid, and cross hair).
H UNDo
This argument returns the instrument to the setting prior to executing
an autoset.
H VIDeo
This autosets the displayed waveform.
H VLines
This autosets the displayed waveform.
H VFields
This autosets the displayed waveform.
Example
AUTOSet VFields
This command sets the instrument to trigger on all video fields.
To Next Page
Loading...
Need help?
General
