TDS5000B Online Programmer Guide
-- 6 2 3 --
REF<x>:LABel:NAMe
Description
This command sets or queries the label of the designated waveform.
The reference waveform is specified by x. The value of x can range
from 1 through 4 for four--channel instruments or 1 through 2 for two--
channel instruments. This command is equivalent to selecting Refer-
ence Waveforms from the File menu, choosing Label from the drop--
down list, selecting the tab associated with the reference for which you
want to create a label, and entering a label in the Label box.
Group
Vertical
Related Commands
REF<x>:LABel
Syntax 1
REF<x>:LABel:NAMe <String>
Syntax 2
REF<x>:LABel:NAMe?
Argument
H <String>
This is the character string that will be used for the reference wave-
form label name.
Example 1
REF3:LABel:NAMe?
This query might return
:REF3:LABEL:NAME ”Signal2”
indicating that the label name for Reference 3 is currently set to ”Sig-
nal2”.
Example 2
REF4:LABel:NAMe ”My Reference”
This command sets the label name of Reference 4 to ”My Reference”.
To Next Page
Loading...
