Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 2 6 9 --
EMail:LIMit
Description
This command sets or queries whether e --mail is sent when a limit test
failure occurs. This command is the same as the LIMit:EMail com-
mand.
Group
Email
Related Commands
LIMit:EMail
Syntax 1
EMail:LIMit {ON|OFF|NR1}
Syntax 2
EMail:LIMit?
Arguments
H ON
This argument enables sending e--mail when a limit test failure oc-
curs.
H OFF
This disables sending e--mail when a limit test failure occurs.
H <NR1>
A 0 disables sending e--mail when a limit test failure occurs; any other
value enables sending e--mail when a limit test failure occurs.
Example 1
EMail:LIMit 1
This command enables sending e --mail when a limit test failure occurs.
Example 2
EMail:LIMit?
This query might return
:EMAIL:LIMIT 0
This indicates that e--mail will not be sent when a limit test failure oc-
curs.