Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 2 9 --
HORizontal[:MAIn]:SCAle Sets time per division for the main
time base
Or returns the main time base hori-
zontal scale
HORizontal:MAIn:UNIts Sets or returns the units for the hor-
izontal main time base
HORizontal:MAIn:UNIts:STRing Sets or returns the units string for
the horizontal main time base trig-
ger delay
HORizontal:MAIn? Returns the time per division of the
main time base
HORizontal:POSition Sets or returns the waveform’s hori-
zontal position on the display
HORizontal:RECOrdlength Sets the horizontal record length to
the number of data points in each
frame
Or returns the current horizontal re-
cord length
HORizontal:RESOlution Sets the horizontal record length to
the number of data points in each
frame and simultaneously adjusts
the sample rate to maintain a
constant time/division
Or returns the current horizontal re-
cord length
HORizontal:ROLL Sets or returns the horizontal roll
mode status
HORizontal:SCAle Sets or returns the time per division
for the main time base
HORizontal:TRIGger:POSition Sets or returns the position of the
horizontal trigger
HORizontal? Returns all learnable settings for
the horizontal commands
Limit Test Command Group
Use the commands in the Limit Test Command Group to perform limit
testing by selecting channel, math, or reference waveforms and compar-
ing them against a template waveform.
Using the limit commands, you can:
H Select a source waveform to compare against the selected template
during a limit test. The source waveform can be a Ch1–Ch4
waveform, a Math1–Math4 waveform, or a Ref1–Ref4 waveform.
(For two--channel instruments, the choices are limited to Ch1–Ch2,
Math1–Math2, or Ref1–Ref2 waveforms.)
H Select a template from the following choices: None and Ref1–Ref4
(only Ref1–Ref2 are available on two--channel instruments).
H Set the limits around a template waveform.
H Reset the instrument to the original limit test default settings. The
default setting for Source is Channel 1 and for Template is None.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English