TDS5000B Online Programmer Guide
-- 4 3 1 --
MASK:FILTer
Description
This command sets or returns whether the selected digital filter will be
run on the waveform data. The filter simulates optical hardware. That
is, it simulates different hardware for each of several different optical
standards.
The digital filter runs on OC1, OC3, OC12, OC48, FC133, FC266,
FC531, FC1063, FC2125Draft, Gigabit Ethernet, Infiniband 2.5Gb,
1394b, 393Mb, 786.4 3Mb, 1.572 Gb
Group
Mask
Related Commands
ACQuire:MODe
Syntax
MASK:FILTer {OFF|ON|<NR1>}
Arguments
H ON
This enables the digital filter.
H OFF
This disables the digital filter.
H <NR1>
A 0 disables the digital filter; any other value enables it.
Example
MASK:FILTER ON
Enables the digital filter.
To Next Page
Loading...
Need help?
General
