Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 2 7 8 --
EMail:TO
Description
This command sets or queries the address of the recipient(s) of an e--
mail.
Group
Email
Syntax 1
Email:TO <string>
Syntax 2
Email:TO?
Argument
H <string>
This argument is the e--mail address of the recipient (or recipients).
Multiple addresses are separated with semicolons (;). For example,
”johndoe@tek.com;billsmith@tek.com” specifies that both johndoe
and billsmith at tek.com will receive e --mail when the event occurs.
The length of this string is limited to 252 characters.
Example 1
Email:TO ”johndoe@tek.com”
This command will send e --mail to johndoe@tek.com when the event
occurs.
Example 2
Email:TO?
This query might return:
:EMAIL:TO ”billsmill@tek.com”
This indicates that the billsmith@tek.com will receive e--mail when the
event occurs.