Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 3 8 3 --
LIMit:COMpare:MATH<x>
Description
This command sets or queries the template against which to compare
the math waveform specified by x, which can be 1 through 4. The tem-
plate can be a waveform saved in any of the reference locations (REF1
through REF4 for four--channel instruments or REF1 through REF2 for
two--channel instruments) or none.
Group
Limit Test
Related Commands
Syntax 1
LIMit:COMpare:MATH<x> {NONe|REF<x>}
Syntax 2
LIMit:COMpare:MATH<x>?
Arguments
H NONe
This argument turns off template testing for the math waveform speci-
fied by MATH<x>.
H REF<x>
This argument selects which reference waveform to use as the tem-
plate against which to compare the math waveform specified by
MATH<x>.
Example 1
LIMit:COMpare:MATH1 REF1
This command specifies REF1 as the template waveform against which
to compare math waveform MATH1.
Example 2
LIMit:COMpare:MATH2?
This query might return:
:LIMIT:COMPARE:MATH2 REF4
This indicates that the MATH2 waveform is compared to the template
waveform stored in REF4.