Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 1 6 5 --
CURSor:XY:PRODUCT<x>?
Description
This query--only command returns the product of the X and Y positions
for the specified cursor when the CURSor:XY:READOUT is set to
PRODuct. The cursor is specified by x, which can be 1 or 2.
Note: This query is only valid when the CURSor:XY:READOUT is
set to PRODuct. If the readout is set other than product, the IEEE rep-
resentation of NAN (Not a Number) is returned: 99.1000E+36.
Group
Cursor
Syntax
CURSor:XY:PRODUCT<x>?
Example
CURSor:XY:PRODUCT1?
This query might return
:CURSOR:XY:PRODUCT1 806.4004E-3
indicating that the product of the X position times the Y position for
Cursor 1 is 806.4004 mVV.