TDS5000B Online Programmer Guide
-- 3 8 7 --
LIMit:HIGHLIGHTHits
Description
This command sets or queries whether violation highlighting occurs
when limit testing is active, and, if the RESET argument is set, clears
the highlighting.
Group
Limit Test
Related Commands
Syntax 1
LIMit:HIGHLIGHTHits {OFF|ON|RESET|<NR1>}
Syntax 2
LIMit:HIGHLIGHTHits?
Arguments
H OFF
This argument disables violation highlighting when limit testing is
active.
H ON
This argument enables violation highlighting when limit testing is
active.
H RESET
This argument clears the violation highlighting.
H NR1
A 0 disables the violation highlighting when limit testing is active;
any other value enables the violation highlighting feature when limit
testing is active. For queries, a 0 is returned if the violation highlight-
ing feature is off; a 1 is returned if the violation highlighting feature is
on.
Example 1
LIMit:HIGHLIGHTHits 1
This command enables the violation highlighting when the limit testing
is active.
Example 2
LIMit:HIGHLIGHTHits?
This query might return:
:LIMIT:HIGHLIGHTHITS 0
This indicates that the violation highlighting feature is disabled.
To Next Page
Loading...
Need help?
General
