Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 3 8 5 --
LIMit:EMail
Description
This command sets or queries whether an e--mail is generated when the
source waveform data exceeds the limits specified for the limit test.
Group
Limit Test
Related Commands
Syntax 1
LIMit:EMail {OFF|ON|<NR1>}
Syntax 2
LIMit:EMail?
Arguments
H OFF
This argument disables generating an e--mail when the source wave-
form exceeds the test limits.
H ON
This argument enables generating an e--mail when the source wave-
form exceeds the test limits.
H NR1
A 0 disables the e --mail feature so that when the source waveform
data exceeds the limits set by the limit test, an e --mail is not generated;
any other value enables the e--mail feature so that when the source
waveform data exceeds the limits set by the limit test, an e--mail is
generated. For queries, a 0 is returned if the e--mail feature is off; a 1
is returned if the e --mail feature is on.
Example 1
LIMit:EMail 1
This command enables the e --mail feature so that when the source wa-
veform data exceeds the limits set by the limit test, an e--mail is gener-
ated.
Example 2
LIMit:EMail?
This query might return:
:LIMIT:EMAIL 0
This indicates that the e --mail feature is disabled and that an e--mail will
not be generated when the source waveform exceeds the limits of the
limit test.