TDS5000B Online Programmer Guide
-- 5 4 7 --
MEASUrement:SOURCE<x>:SIGType
(TDS5000B Series option SM)
Description
This command sets or queries the type of input signal used for measure-
ment SOURCE<x>, 1 or 2.
To ensure accurate measurements, use this command to specify the in-
put--signal type for the measurement source.
Group
Measurement
Syntax 1
MEASurement:SOUrce<x>:SIGType {PULse|EYE}
Syntax 2
MEASurement:SOUrce<x>:SIGType?
Arguments
H PULSE
Use this signal type for generic signals that are not associated with
synchronous communications standards.
H EYE
Use this signal type for synchronous--communication signals with
NRZ--like characteristics (nonreturn to zero).
Example 1
MEASurement:SOUrce1:SIGType PULse
This command selects Pulse as the signal type for source 1.
Example 2
MEASurement:SOUrce<x>:SIGType?
This query might return
:MEASUREMENT:SOURCE1:SIGTYPE EYE
indicating that the signal type for source 1 is EYE.