Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 2 2 5 --
DISplay:COLOr:PALEtte:USEr:CH<x>
Description
This command sets or queries the hue --lightness --saturation (HLS) trip-
let to be used for the specified channel color for the user palette. The
channel is specified by x. The value of x can range from 1 through 4 for
four--channel instruments or 1 through 2 for two--channel instruments.
Group
Display Control
Syntax 1
DISplay:COLOr:PALEtte:USEr:CH{1|2|3|4}
<NR1>,<NR1>,<NR1>
Syntax 2
DISplay:COLOr:PALEtte:USEr:CH{1|2|3|4}?
Arguments
H <NR1>
Hue. Range of 0 to 360.
H <NR1>
Lightness. Range of 0 to 100.
H <NR1>
Saturation. Range of 0 to 100.
Example 1
DISplay:COLOr:PALEtte:USEr:CH1 330,75,100
This command sets the channel 1 color for the user palette to 330, 75,
or 100.
Example 2
DISplay:COLOr:PALEtte:USEr:CH2?
This query might return
:DISPLAY:COLOR:PALETTE:USER:CH2 325,65,100
indicating that channel 2 color for the user palette is set at 325 for hue,
the set to 65 for lightness, and 100 for saturation.

Tektronix TDS5000B Series Specifications

General

Channels	2 or 4
Vertical Resolution	8 bits
Display Type	Color LCD
Vertical Sensitivity	1 mV/div to 10 V/div
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Operating Temperature	0 °C to +50 °C
Bandwidth	up to 1 GHz
Sample Rate	up to 5 GS/s
Display Size	10.4 inches
Input Impedance	1 MΩ ± 1%
Trigger Types	Edge, Pulse Width, Logic, Runt, Timeout, Setup/Hold
Maximum Input Voltage	300 V (DC + peak AC)
Interface	USB, GPIB, Ethernet