Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 2 7 9 --
EMail:TRIgger
Description
This command sets or queries whether e --mail is sent when a trigger
occurs. The e--mail is sent after the acquisition is complete.
Group
Email
Syntax 1
EMail:TRIgger {ON|OFF|NR1}
Syntax 2
EMail:TRIgger?
Arguments
H ON
This argument enables sending e--mail when a trigger occurs.
H OFF
This disables sending e--mail when a trigger occurs.
H <NR1>
A 0 disables sending e --mail when a trigger occurs; any other value
enables sending e--mail when a trigger occurs.
Example 1
EMail:TRIgger 1
This command enables sending e --mail when a trigger occurs.
Example 2
EMail:TRIgger?
This query might return
:EMAIL:TRIGGER 0
This indicates that e--mail will not be sent when a trigger occurs.