TDS5000B Online Programmer Guide
-- 4 3 2 --
MASK:HIGHLIGHTHits
Description
This command sets or returns whether or not hits in a mask are high-
lighted in different colors than other waveform data. The default is On.
Group
Mask
Syntax 1
MASK:HIGHLIGHTHits {OFF|ON|<NR1>}
Syntax 2
MASK:HIGHLIGHTHits?
Arguments
H ON
This enables the mask:highlighthits function.
H OFF
This disables the mask:highlighthits function.
H <NR1>
A 0 disables the mask:highlighthits function; any other value enables
it.
Example
MASK:HIGHLIGHTHITS ON
Enables the mask highlighthits function.
To Next Page
Loading...
Need help?
General
