Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 3 4 2 --
HORizontal:FASTframe:STATE
Description
This command sets or returns the state of FastFrame acquisition. This is
equivalent to setting FastFrame to On in the FastFrame Setup menu.
FastFrame lets users capture a series of triggered acquisitions with
minimal time between them.
The digitizing oscilloscope in FastFrame mode is ready to accept a con-
tinuous burst of triggers 400 ms after the controller sends the AC-
Quire:STATE RUN command.
Group
Horizontal
Related Commands
ACQuire:STATE RUN
Syntax 1
HORizontal:FASTframe:STATE {ON|OFF|<NR1>}
Syntax 2
HORizontal:FASTframe:STATE?
Arguments
H <ON>
This turns on horizontal FastFrame.
H <OFF>
This turns off horizontal FastFrame.
H <NR1>
A 0 turns off horizontal FastFrame; any other value turns on horizon-
tal FastFrame.
Example 1
HORIZONTAL:FASTFRAME:STATE ON
This command turns on horizontal FastFrame.
Example 2
HORIZONTAL:FASTFRAME:STATE?
This query might return
:HORIZONTAL:FASTFRAME:STATE 0
This indicates that the current state of FastFrame is off.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English