Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 8 1 --
TRIGger:B:EDGE:SLOpe
Description
This command sets or queries the slope for the B trigger. This com-
mand is equivalent to selecting B Event (Delayed) Trigger Setup from
the Trig menu and choosing the Slope.
Group
Trigger
Related Commands
TRIGger:B:EDGE?
Syntax 1
TRIGger:B:EDGE:SLOpe {RISe|FALL}
Syntax 2
TRIGger:B:EDGE:SLOpe?
Arguments
H RISe
This argument specifies the trigger on the rising or positive edge of a
signal.
H FALL
This argument specifies the trigger on the falling or negative edge of a
signal.
Example 1
TRIGger:B:EDGE:SLOpe?
This query might return
:TRIGGER:B:EDGE:SLOPE RISE
indicating that the B edge trigger occurs on the rising slope.
Example 2
TRIGger:B:EDGE:SLOpe FALL
This command sets the B edge trigger to occur on the falling slope.