Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 1 5 1 --
CURSor:STATE
Description
This command sets or queries the state of cursors. Note that setting the
cursor state does not modify the cursor type.
This command is equivalent to pressing the CURSOR button on the
front panel.
Group
Cursor
Related Commands
CURSor:FUNCtion OFF
Syntax 1
CURSor:STATE {ON|OFF|<NR1>}
Syntax 2
CURsor:STATE?
Arguments
H ON
Displays the cursors.
H OFF
Removes cursors from the display.
H <NR1>
A 0 disables the display cursors; any other value enables the display
cursors.
Example 1
CURSor:STATE ON
This command displays the cursors.
Example 2
CURSor:STATE?
This query might return
:CURSOR:STATE 1
indicating that the cursors are active on the display.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English