TDS5000B Online Programmer Guide
-- 1 9 8 --
DIAg:ITEM:FAILURES?
Description
This query--only command returns the total number of failures. This
command is equivalent to selecting Instrument Diagnostics from the
Utilities menu and then reviewing the Diagnostic Status.
This query--only command can be issued while diagnostics are still in
progress.
Group
Diagnostics
Related Commands
DIAg:ITEM?, DIAg:ITEM:NAME?, DIAg:ITEM:RESULT?,
DIAg:ITEM:SUBITEMS?
Syntax
DIAg:ITEM:FAILURES? <NR1>
Arguments
H <NR1>
This sets the index item about which data will be returned, which
ranges from 0 through 15.
Example
DIAg:ITEM:FAILURES? 2
This query might return:
:DIAG:ITEM:FAILURES 2,0
This indicates that there were 0 failures for item 2.
To Next Page
Loading...
