Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 4 4 5 --
MASK:MASKPRE:VOFFSet
Description
This command sets or returns the nominal vertical offset, in volts, used
to vertically offset the input channels. The query form of this command
returns the offset value of the displayed mask. The set form of this
command only affects the current (displayed) mask.
Group
Mask
Related Commands
MASK:MASKPRE:VPOS , MASK:MASKPRE:VSCAle
Syntax 1
MASK:MASKPRE:VOFFSet <NR3>
Syntax 2
MASK:MASKPRE:VOFFSet?
Argument
H <NR3>
Is a floating point number that sets the nominal vertical offset in volts.
Example
MASK:MASKPRE:VOFFSET 0.0
Sets the current mask nominal vertical offset to 0.0 volts.