Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 4 5 --
TRIGger:A:PULse:WIDth?
Description
This query--only command returns the width parameters for the A pulse
width trigger. This command is equivalent to selecting Width Setup
from the Trig menu and then viewing the current pulse width trigger
Lower Limit, Upper Limit, Trig When and Polarity settings.
Group
Trigger
Related Commands
TRIGger:A:PULse:WIDth:HIGHLimit,
TRIGger:A:PULse:WIDth:LOWLimit,
TRIGger:A:PULse:WIDth:POLarity,
TRIGger:A:PULse:WIDth:WHEn
Syntax 1
TRIGger:A:PULse:WIDth
Example
TRIGger:A:PULse:WIDth?
This query might return
:TRIGGER:A:PULSE:WIDTH:LOWLIMIT 2.0000E-9;
HIGHLIMIT 2.0000E-9;WHEN WITHIN;
POLARITY POSITIVE
as the current A width trigger parameters.