Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 4 0 6 --
MASK:AUTOSet:HSCAle
Description
This command controls whether the autoset algorithm will attempt to
change the horizontal scale while attempting to autoset.
This command, like all the MASK:AUTOSET commands, affects only
an autoset on a standard mask, not the general oscilloscope autoset
function.
Group
Mask
Syntax
MASK:AUTOSet:HSCAle {ON|OFF|<NR1>}
Arguments
H ON
This enables the autoset:hscale function.
H OFF
This disables the autoset:hscale function.
H <NR1>
A 0 disables the autoset:hscale function; any other value enables it.
Example
MASK:AUTOSet:HSCAle ON
Enables the autoset:hscale function.