Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 3 8 4 --
LIMit:COMpare:REF<x>
Description
This command sets or queries the template against which to compare
the reference waveform specified by x, which can be 1 through 4. The
template can be a waveform saved in any of the reference locations
(REF1 through REF4 for four --channel instruments or REF1 through
REF2 for two--channel instruments) or none.
Group
Limit Test
Related Commands
Syntax 1
LIMit:COMpare:REF<x> {NONe|REF<x>}
Syntax 2
LIMit:COMpare:REF<x>?
Arguments
H NONe
This argument turns off template testing for the math waveform speci-
fied by MATH<x>.
H REF<x>
This argument selects which reference waveform to use as the tem-
plate against which to compare the reference waveform specified by
REF<x>.
Example 1
LIMit:COMpare:REF2 REF1
This command specifies REF2 as the template waveform against which
to compare reference waveform REF1.
Example 2
LIMit:COMpare:REF2?
This query might return:
:LIMIT:COMPARE:REF2 REF4
This indicates that the REF4 waveform is compared to the template
waveform stored in REF2.