Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 3 3 7 --
HORizontal:FASTframe:MULtipleframes:
NUMFRames:<wfm>
Description
This command sets or queries the number of frames on the specified
waveform for the FastFrame multiple frames feature. The multiple
frames feature supports displaying multiple frames in an overlaid man-
ner.
Group
Horizontal
Related Commands
HORizontal:FASTframe:MULtipleframes:FRAMESTart:<wfm>
<NR1>,
HORizontal:FASTframe:MULtipleframes:MODe,
HORizontal:FASTframe:COUNt
Syntax 1
HORizontal:FASTframe:MULtipleframes:NUM-
FRames:<wfm> <NR1>
Syntax 2
HORizontal:FASTframe:MULtipleframes:NUM-
FRames:<wfm>?
Argument
H <wfm>
This specifies the waveform source. Valid waveforms include CH<x>,
MATH<x>, and REF<x>. Express the x variable as an integer ranging
from 1 through 4 in four--channel instruments and 1 through 2 in two--
channel instruments.
H <NR1>
This represents the number of frames on the specified waveform.
Example 1
HORIZONTAL:FASTFRAME:MULTIPLEFRAMES:NUM-
FRAMES:CH1 3
This command sets the number of frames to 3 on channel 1.