Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 7 2 8 --
TRIGger:A:PULse:SOUrce
Description
This command sets or queries the source for the A pulse trigger. This
source parameter applies to all classes of pulse triggers. This command
is equivalent to selecting A Event (Main) Trigger Setup from the Trig
menu, selecting the pulse type (Glitch, Width, Runt, Timeout, or Tran-
sition), and then choosing the desired channel from the Source pull--
down list.
Group
Trigger
Related Commands
TRIGger:A:EDGE:SOUrce
Syntax 1
TRIGger:A:PULse:SOUrce CH<x>
Syntax 2
TRIGger:A:PULse:SOUrce?
Argument
H CH<x>
This specifies one of the input channels, which range from 1 through
4 for four--channel instruments and 1 through 2 for two--channel in-
struments.
Example 1
TRIGger:A:PULse:SOUrce?
This query might return
:TRIGGER:A:PULSE:SOURCE CH2
indicating that channel 2 is the source for the A pulse trigger.
Example 2
TRIGger:A:PULse:SOUrce CH4
This command sets channel 4 as the source for the A pulse trigger.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English