Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 5 7 3 --
MEASUrement:MEAS<x>:REFLevel:ABSolute:LOW
Description
This command sets or queries the low reference level, and is the lower
reference level when MEASUrement:MEAS<x>:REFLevel:METHod
is set to Absolute. Measurements are specified by x, which ranges from
1 through 8.
Note: This command affects the results of rise and fall measurements.
Group
Measurement
Related Commands
MEASUrement:MEAS<x>:REFLevel:METHod
Syntax 1
MEASUrement:MEAS<x>:REFLevel:ABSolute:LOW
<NR3>
Syntax 2
MEASUrement:MEAS<x>:REFLevel:ABSolute:LOW?
Arguments
H <NR3>
This is the low reference level, in volts. The default is 0.0 V.
Example 1
MEASUrement:REFLEVEL:ABSolute:LOW 0.0 V.
This command sets the low reference level to 0.0 V.
Example 2
MEASUREMENT:MEAS1:REFLEVEL:ABSolute:LOW?
This query might return
:MEASUREMENT:MEAS1:REFLEVEL:ABSOLUTE:LOW
0.0000E+00
indicating that the absolute low reference level is set to 0.0 V.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English