Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 7 4 3 --
TRIGger:A:PULse:WIDth:WHEn
Description
This command sets or queries whether to trigger on a pulse width that
falls outside (or within) the specified range of limits. You can define or
query trigger pulse width upper and lower limits using the TRIG-
ger:A:PULse:WIDth:HIGHLimit and TRIGger:A:PULse:WIDth:LOW-
Limit commands.
This command is equivalent to selecting Width Setup from the Trig
menu and then choosing from the Trig When drop--down list.
Group
Trigger
Related Commands
TRIGger:A:PULse:WIDth:HIGHLimit, TRIG-
ger:A:PULse:WIDth:LOWLimit
Syntax 1
TRIGger:A:PULse:WIDth:WHEn {OUTside|WIThin}
Syntax 2
TRIGger:A:PULse:WIDth:WHEn?
Arguments
H OUTside
This argument causes a trigger event the duration of the pulse is great-
er than the high limit or less than the low limit specified. The high and
low limits are specified with the TRIGger:A:PULse:WIDth:HIGHLi-
mit and TRIGger:A:PULse:WIDth:LOWLimit commands respective-
ly.
H WIThin
This argument causes a trigger event when the duration of the pulse is
within the high and low limits. The high and low limits are specified
with the TRIGger:A:PULse:WIDth:HIGHLimit and TRIG-
ger:A:PULse:WIDth:LOWLimit command respectively.
Example 1
TRIGger:A:PULse:WIDth:WHEn?
This query might return
:TRIGGER:A:PULSE:WIDTH:WHEN OUTSIDE
indicating the conditions for generating a width trigger.

Tektronix TDS5000B Series Specifications

General

Channels	2 or 4
Vertical Resolution	8 bits
Display Type	Color LCD
Vertical Sensitivity	1 mV/div to 10 V/div
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Operating Temperature	0 °C to +50 °C
Bandwidth	up to 1 GHz
Sample Rate	up to 5 GS/s
Display Size	10.4 inches
Input Impedance	1 MΩ ± 1%
Trigger Types	Edge, Pulse Width, Logic, Runt, Timeout, Setup/Hold
Maximum Input Voltage	300 V (DC + peak AC)
Interface	USB, GPIB, Ethernet