Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 1 8 2 --
DATa:DESTination
Description
This command sets or queries the reference memory location for stor-
ing waveform data that is transferred into the instrument by the CURVe
command.
Group
Waveform Transfer
Related Commands
CURVe
Syntax 1
DATa:DESTination REF<x>
Syntax 2
DATa:DESTination?
Argument
H REF<x>
This is the reference where the waveform will be stored. The refer-
ence number is specified by x, which ranges from 1 through 4.
Example 1
DATa:DESTination?
This query might return
:DATA:DESTINATION REF3
indicating that reference 3 is the currently selected reference memory
location for waveform data.
Example 2
DATa:DESTination REF1
This command indicates that incoming waveform data be stored in ref-
erence 1.

Tektronix TDS5000B Series Specifications

General

Brand	Tektronix
Model	TDS5000B Series
Category	Test Equipment
Language	English