Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 6 4 6 --
TEST:RESults?
Description
This query--only command returns an abbreviated status about the re-
sults of the last TEST execution. This command is equivalent to select-
ing Instrument Diagnostics from the Utilities menu and then reviewing
the Diagnostic Status.
Group
Diagnostics
Related Commands
TEST, TEST:RESults:VERBose?
Syntax
TEST:RESults?
Example 1
TEST:RESults?
This query might return
:TEST:RESULTS ”135”
indicating the specific failure code of the first test failure.
Example 2
TEST:RESults?
This query might return
:TEST:RESULTS ”PASS”
indicating that the previously executed test passed.
Example 3
TEST:RESults?
This query might return
:TEST:RESULTS ”*****”
indicating that the test was not run.