TDS5000B Online Programmer Guide
-- 8 4 5 --
ZOOm:ZOOM<x>:<wfm>:HORizontal:POSition
Description
This command sets or queries the horizontal position of the specified
waveform for the specified zoom, where x is an integer from 1 to 4 rep-
resenting the desired zoom window. The setting of the
ZOOm:ZOOM<x>:SCROLLLOCk command determines the wave-
forms that are affected.
Group
Zoom
Syntax 1
ZOOm:ZOOM<x>:<wfm>:HORizontal:POSition <NR3>
Syntax 2
ZOOm:ZOOM<x>:<wfm>:HORizontal:POSition?
Argument
H <NR3>
This is a value from 0 to 100.00 and is the percent of the waveform
that is to the left of screen center, when the zoom factor is 1x or great-
er.
Example 1
ZOOm:ZOOM1:CH1:HORizontal:POSition 50
This command sets the Zoom1 reference pointer at 50% of acquired
waveform.
Example 2
ZOOm:ZOOM1:CH1:HORizontal:POSition?
This query might return
:ZOOM1:CH1:HORIZONTAL:POSITION 50.0000
indicating that the Zoom1 reference pointer for Channel 1 is currently
set at 50% of acquired waveform.
To Next Page
Loading...
Need help?
General
