Tektronix TDS5000B Series Online Programmer Guide

TDS5000B Online Programmer Guide
-- 5 4 5 --
MEASUrement:IMMed:REFLevel:PERCent:MID2
Description
This command sets or queries the percentage (where 100% is equal to
HIGH) used to calculate the mid reference level for the second wave-
form specified when MEASUrement:IMMed:REFLevel:METHod is set
to Percent. Note that this command affects the results of delay measure-
ments.
Group
Measurement
Related Commands
MEASUrement:IMMed:REFLevel:METHod
Syntax 1
MEASUrement:IMMed:REFLevel:PERCent:MID2 <NR1>
Syntax 2
MEASUrement:IMMed:REFLevel:PERCent:MID2?
Arguments
H <NR1>
This is the mid reference level, ranging from 0 to 100%. The default
mid reference level is 50%.
Example 1
MEASUREMENT:IMMED:REFLEVEL:PERCENT:MID2 40
This command sets the mid2 reference level to 40% of HIGH.
Example 2
MEASUREMENT:IMMED:REFLEVEL:PERCENT:MID2?
This query might return
:MEASUREMENT:IMMED:REFLEVEL:PERCENT:MID2 45
Indicating that the percentage mid2 reference level is set to 45% of
HIGH.

Tektronix TDS5000B Series Specifications

General

Channels	2 or 4
Vertical Resolution	8 bits
Display Type	Color LCD
Vertical Sensitivity	1 mV/div to 10 V/div
Input Coupling	AC, DC, GND
Timebase Accuracy	± 50 ppm
Operating Temperature	0 °C to +50 °C
Bandwidth	up to 1 GHz
Sample Rate	up to 5 GS/s
Display Size	10.4 inches
Input Impedance	1 MΩ ± 1%
Trigger Types	Edge, Pulse Width, Logic, Runt, Timeout, Setup/Hold
Maximum Input Voltage	300 V (DC + peak AC)
Interface	USB, GPIB, Ethernet