Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 7 4 0 --
TRIGger:A:PULse:WIDth:HIGHLimit
Description
This command sets or queries the upper limit for the width trigger. This
command is equivalent to selecting Width Setup from the Trig menu
and setting the Upper Limit.
Group
Trigger
Related Commands
TRIGger:A:PULse:WIDth?
Syntax 1
TRIGger:A:PULse:WIDth:HIGHLimit <NR3>
Syntax 2
TRIGger:A:PULse:WIDth:HIGHLimit?
Argument
H <NR3>
This specifies the width trigger upper limit in seconds.
Example 1
TRIGger:A:PULse:WIDth:HIGHLimit?
This query might return
:TRIGGER:A:PULSE:WIDTH:HIGHLIMIT 2.0000E-9
indicating that the upper limit of the width trigger is set to 2 ns.
Example 2
TRIGger:A:PULse:WIDth:HIGHLimit 5.0E-6
This command sets the upper limit of the width trigger to 5 µs.