TDS5000B Online Programmer Guide
-- 6 2 2 --
REF<x>:LABel?
Description
This query--only command returns a branch query containing the wave-
form label name and the coordinates at which the label (attached to the
displayed waveform of the specified reference) is displayed. The refer-
ence waveform is specified by x. The value of x can range from 1
through 4 for four--channel instruments or 1 through 2 for two--channel
instruments. This command is equivalent to selecting Reference Wave-
forms from the File menu and then choosing Label from the drop--down
list.
Group
Vertical
Related Commands
REF<x>:LABel:NAMe?, REF<x>:LABel:XPOS?,
REF<x>:LABel:YPOS?
Syntax
REF<x>:LABel?
Argument
None
Example
REF1:LABel?
This query might return
:REF1:LABel:NAMe ”Myname”;:XPOS-200;:YPOS 50.
To Next Page
Loading...
