TDS5000B Online Programmer Guide
-- 1 0 8 --
CALibrate:INTERNal:STATus?
Description
This query--only command returns the current status of the instrument
internal signal path calibration for the last SPC operation.
Group
Calibration
Related Commands
*CAL?
Syntax
CALibrate:INTERNal:STATus?
Returns
This query will return one of the following:
H INIT
Indicatesthe instrument has not had internal signal path calibration
run.
H WARMUP
Indicates the instrument has not warmed up for the required time to
perform signal path calibration.
H PASS
Indicates that the signal path calibration completed successfully.
H FAIL
Indicates that the signal path calibration did not complete successful-
ly.
H TEMPDRIFT
Indicates that the instrument has not reached a state of stable tempera-
ture adequate for performing signal path calibration.
H RUNNING
Indicates that the signal path calibration is currently running.
Example
CALibrate:INTERNal:STATus?
This query might return
:CALIBRATE:INTERNAL:STATUS INIT
indicating that the current status of the internal signal path calibration is
that it has not been run.
To Next Page
Loading...
