TDS5000B Online Programmer Guide
-- 3 8 9 --
LIMit:LOG
Description
This command sets or queries whether a log file is saved when the
source waveform data exceeds the test limits.
Group
Limit Test
Related Commands
Syntax 1
LIMit:LOG {OFF|ON|NR1}
Syntax 2
LIMit:LOG?
Arguments
H OFF
This argument disables saving a log file when the source waveform
exceeds the test limits.
H ON
This argument enables saving a log file when the source waveform
exceeds the test limits.
H NR1
A 0 disables the save log file feature so that when the source wave-
form data exceeds the limits set by the limit test, a log file is not
saved; any other value enables the save log file feature so that when
the source waveform data exceeds the limits set by the limit test, a log
file is saved. For queries, a 0 is returned if the save log file feature is
off; a 1 is returned if the save log file feature is on.
Example 1
LIMit:LOG 1
This command enables the save lof file feature so that when the source
waveform data exceeds the limits set by the limit test, a lof file is saved.
Example 2
LIMit:LOG?
This query might return:
:LIMIT:LOG 0
This indicates that the save log file feature is disabled and that a log file
will not be saved when the source waveform exceeds the limits of the
limit test.
To Next Page
Loading...
Need help?
General
