EasyManuals Logo
Home>Tektronix>Test Equipment>TDS5000B Series

Tektronix TDS5000B Series Online Programmer Guide

Tektronix TDS5000B Series
917 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
TDS5000B Online Programmer Guide
-- 2 3 --
E- mail Command Group
Commands in the E--mail group allow you to send e--mail to one or
more designated recipients whenever a selected event, such as a trigger,
mask test failure (Option SM only), or a limit test failure occurs in the
instrument.
Using this feature, you do not have to continually monitor the instru-
ment for the event.
When an event occurs, the instrument will send an SMTP mail message
to one or more designated recipients through the specified mail server.
The message can include any of the following:
H Screen image
H Waveform data
H Measurement data at the time of the event
NOTE: Your instrument must be connected to the Local Area Network
(LAN) using Transfer C Protocol/Internet Protocol (TCP/IP). The re-
cipient must also have an SMTP mail server. To send e--mail for a mask
test failure, you must have Mask Testing (Option SM) installed.
Command Description
EMail Sends a test e--mail message or sets the current
e--mail sent count to zero.
EMail:ATTempts Sets or queries the number of times that an at-
tempt will be made to send e--mail to the SMTP
e--mail server
EMail:AUTHLogin Sets or queries the login name that will be used if
the SMTP e--mail server requires one for authenti-
cation
EMail:AUTHPassword Sets the password that will be used if the SMTP
e--mail server requires one for authentication
EMail:COUnt? Returns the number of e--mails that have been
sent since Email on Event was armed
EMail:FRom Sets or queries the From line in the e--mail
EMail:HOSTwanted Sets or queries the hostname that will be used
when e--mail is sent to the SMTP e--mail server
EMail:IMage Sets or queries whether image data is included in
the e--mail
EMail:LIMit Sets or queries whether e--mail is sent when a limit
test failure occurs
EMail:MASk Sets or queries whether e--mail is sent when a
mask test failure occurs
EMail:MAXsize Sets or queries the maximum size (in megabytes)
of e--mail that can be sent to the SMTP server
EMail:MEASurement Sets or queries whether measurement data is in-
cluded in the e--mail
EMail:NUMemails Sets or queries the number e--mails that can be
sent when Email onEvent is armed

Table of Contents

Other manuals for Tektronix TDS5000B Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Tektronix TDS5000B Series and is the answer not in the manual?

Tektronix TDS5000B Series Specifications

General IconGeneral
BrandTektronix
ModelTDS5000B Series
CategoryTest Equipment
LanguageEnglish

Related product manuals