Tektronix TDS5000B Series

TDS5000B Online Programmer Guide
-- 8 4 3 --
ZOOm:GRAticule:SPLit
Description
This command sets or returns the sizes of the acquisition and zoom
windows when Zoom is selected.
Note: For this command to have an effect on the display, you must
have the zoom mode turned on. Use the ZOOm:MODe command to
turn on the zoom mode. The ZOOm:GRAticule:SPLIT command is
equivalent the selecting Zoom Setup from the Horiz/Acq menu and
selecting a value for the Graticule
Split in the control window.
Group
Zoom
Related Commands
ZOOm:MODe
Syntax 1
ZOOm:GRAticule:SPLit {FIFtyfifty|EIGHtytwen-
ty|FuLl}
Syntax 2
ZOOm:GRAticule:SPLit?
Arguments
H FIFtyfifty
This argument sets half of the available display to the zoomed grati-
cule and half of the available display to the acquisition graticule; this
argument is the default value.
H EIGHtytwenty
This argument sets 80% of the available display to the zoomed grati-
cule and 20% to the acquisition graticule.
H FULl
This argument sets the entire display to the zoomed graticule.
Example 1
ZOOm:GRAticule:SPLit?
This query might return :ZOOM:GRATICULE:SPLIT FIFTYFIF-
TY, indicating that the display area is divided equally between the
zoomed graticule and the acquisition graticule.
Example 2
ZOOm:GRAticule:SPLit FULl
This command sets the full display area to the zoomed graticule.