TDS5000B Online Programmer Guide
-- 11 2 --
CH<x>?
Description
This query--only command returns the vertical parameters for the speci-
fied channel. The channel is specified by x. The value of x can range
from 1 through 4 for four--channel instruments or 1 through 2 for two--
channel instruments. This command is similar to selecting Vertical Set-
up from the Vertical menu.
Group
Vertical
Syntax
CH<x>?
Example
CH1?
This query might return the following vertical parameters for channel 1:
:CH1:BANDWIDTH 1.0000E+09;COUPLING DC;DES-
KEW0.0000E+00;OFFSET 0.0000E+00;POSITION
0.0000E+00;SCALE 5.0000E-01;TERMINATION
1.0000E+06;PROBCAL INIT;PROBE:GAIN
1.0000E+00;RESISTANCE 1.0000E+06;UNITS
”V”;ID:TYPE ”1X”;SERNUMBER ”N/A”;:CH1:PROBE-
FUNC:EXTATTEN 1.0000E+00;EXTUNITS
”None”;:CH1:LABEL:NAME ””;XPOS 5;YPOS 5
To Next Page
Loading...
