TDS5000B Online Programmer Guide
-- 7 9 8 --
WFMInpre:BYT_Or
Description
This command sets or queries which byte of binary waveform data is
transmitted first for incoming waveform data when data points require
more than one byte. This specification only has meaning when
WFMInpre:ENCdg is set to BIN and WFMInpre:BYT_Nr is greater
than 1.
Group
Waveform Transfer
Related Commands
WFMInpre:ENCdg, WFMInpre:BYT_Nr, WFMOutpre:BYT_Or
Syntax 1
WFMInpre:BYT_Or {LSB|MSB}
Syntax 2
WFMInpre:BYT_Or?
Arguments
H LSB
This specifies that the least significant byte will be transmitted first.
H MSB
This specifies that the most significant byte will be transmitted first.
Example 1
WFMInpre:BYT_Or?
This query might return
:WFMINPRE:BYT_OR LSB
indicating that the least significant incoming CURVe data byte will be
transmitted first.
Example 2
WFMInpre:BYT_Or MSB
This command sets the most significant incoming byte of incoming
waveform data to be transmitted first.
To Next Page
Loading...
Need help?
General
