TDS5000B Online Programmer Guide
-- 4 4 3 --
MASK:MASKPRE:SERIALTRIG
Description
This command sets or returns the type of triggering used in pass/fail
testing of the current mask.
Group
Mask
Related Commands
MASK:MASKPRE:PATTERNBITS, MASK:MASKPRE:PRESAMP-
BITS
Syntax 1
MASK:MASKPRE:SERIALTRIG
{AMI|HDB3|B3ZS|B6ZS|B8ZS|CMI|NRZ|MLT3|EDGE}
Syntax 2
MASK:MASKPRE:SERIALTRIG?
Argument
H AMI
Alternate Mark Inversion
H HDB3
High--Density Bipolar Three --Bit substitution
H B3ZS
Bipolar 3 Zero Substitution
H B6ZS
Bipolar 6 Zero Substitution
H B8ZS
Bipolar 8 Zero Substitution
H CMI
Coded Mark Inversion
H NRZ
Non--Return to Zero
H MLT3
Multi--Level Transition
Example
MASK:MASKPRE:SERIALTRIG AMI
Sets AMI as the type of triggering used in testing the current mask.
To Next Page
Loading...
Need help?
General
