TDS5000B Online Programmer Guide
-- 8 0 5 --
WFMInpre:WFId
Description
This command (no query form) accepts but ignores the argument. This
command is provided only to allow a waveform extracted from the in-
strument to be easily imported.
Group
Waveform Transfer
Related Commands
DATa:DESTination, WFMInpre:BN_Fmt, WFMInpre:ENCdg,
WFMOutpre:WFid
Syntax
WFMInpre:WFId <String>
Argument
H <String>
This must be a valid IEEE--488.2 string (but the contents are ignored).
Example
WFMInpre:WFId ”Ch1, DC coupling, 2.000V/div,
400.0ns/div, 500 points, Sample mode”
This is a syntactically correct command.
To Next Page
Loading...
